HARMAN KARDON CITATION7.0
Manual de Usuario

Citation 7.0 Owner�s Manual Preliminary Draft

To adjust the ambiance level in your custom venue, start at the main Venue Edit menu, and press the � � button so that the on screen pointer is on the bottom line next to �Ambiance�. Press �select� to move to the next menu screen. At the �Adjust Ambiance� screen (figure #xx) a slider scale will appear. Use the � � and � � buttons to enter a desired ambiance level. When you have entered the amount, press �Exit/OK� to enter the setting and return to the Custom Venue Edit menu. NOTE: In order to complete the creation of a custom venue, you MUST enter some ambiance. Even though this can be as little as �01� on the sliding scale, some ambiance must be included as part of the settings, or the venue will not be recorded to memory. Entering A Custom Venue At this stage you will have adjusted each of the five components of a custom venue. You may return to any of the settings before completing the process by using the � � and � � buttons to select the item to be fine tuned. Follow the directions shown above to adjust any of the individual items. When all adjustments are completed, press �Exit/OK�. IF you wish to cancel the settings and ignore the setup, press �Cancel� to return to normal operation without entering the settings to memory. To SAVE the settings as a custom venue, press �Select�. NOTE: Once a custom venue has been created, it is also available to be called up during any listening session by pressing the �Venue� button on the remote. The venue settings created by the process described above will appear as the �Custom Venue� choice on all menus. Edit Name Once you have entered all the settings that will be used to create the new surround mode, you will want to give it a name. Although the mode will continue to be called back by using one of the �Custom� buttons on the remote, giving the mode a name will personalize it for you. To give a new name to a mode, start at the �Surround Mode Edit� menu, and then press � � until the on screen pointer is next to �Edit Name� (figure #xx). Press �Select� to continue. At the �Name Edit� menu you change the name that is preset with any ten character entry that you choose. To change the name, press � � and � � to move the pointer under the letter you wish to change. (Figure #xx). Press the � � and � � buttons on the remote to scroll through the list of alphanumeric characters. When the desired character appears, press � � and � � to move the pointer under the next character to be changed. When the mode name is complete, press �exit/OK� to return to the Surround Mode Edit menu.

Page # 63
Enitre Contents Copyright ©1995 - Harman Kardon Inc.